Summer Starts Here - Save up to 70%
Trailer Wiring Harness Installation - 2008 Chrysler Aspen- Video
Today on this 2008 Chrysler Aspen, we're going to install part number c55597 from Curt. This is the Curt T connecter Wiring Harness. First thing we need to do is go ahead and open up the back hatch and get access behind the tail lights. There are two plastic rivets on each tail light that we have to remove so we can take off the tail light. We pull off the center with a pair of pliers, and they come right out. Then set the fasteners off to the side and we'll go ahead and pop the tail light loose. Next we need to disconnect the wire harness. more
1/20/2015 2:47:42 PM
Trailer Wiring Harness Installation - 2007 Chrysler Aspen- Video
Today on this 2007 Chrysler Aspen we are going to install part number 118390 from Tow Ready. First thing we need to do is go ahead and get our vehicle ready to install the wire harness. To do that we need to go ahead and open up the tail gate and get access to remove the tail lights. To remove the tail lights, well go ahead and remove these plastic fasteners with a pair of pliers grip the centres and pull it out. Now were going to remove the tail light. Well go ahead and work the bottom and top little bit and pull back. Theyll unsnap from these fasteners here. Now before we connect the wire harness, weve got to loosen up this red lock right here. more
6/17/2014 8:49:12 AM
Trailer Wiring Harness Installation - 2009 Chrysler Aspen- Video
Today on this 2009 Chrysler Aspen we are going to install part number 118390 from Tow Ready. This is their modulite wiring harness. The first thing we need to do is open up the back hatch of the vehicle and get to the fasteners that hold the lights in place. We are going to remove the taillights as our first step. These just have plastic fasteners that you just remove. When you pull these off, you want to kind of pull them off to the side a little bit and pull back a little bit. We can go ahead and disconnect this light for now. Just push in this red tab right here and push down this button and it comes apart. We have our driver side off. Let us go ahead and do the same thing with the passenger side. Next we are going to take our wire harness and we are going to the 4-pole end down behind the bumper, towards the ground for now. And then the lead with the red, yellow and brown wires, we are going to hook up to the wiring harness that was going into the taillight. Next we will take our white and green wire and do the same thing like we did with the 4-pole wire. Drop it behind the bumper and out of our way. 1:01 more
3/14/2011 6:19:42 AM
Trailer Wiring Harness Installation - 2008 Chrysler Aspen 118390- Video
Today on this 2008 Chrysler Aspen we will be installing part number 118390 from Tow Ready. This is a T-One wiring connector. To begin our install we need to open up the hatch to get to the plastic rivets that holds the tail lights in place. The tail lights have to come off because our wiring connections are behind the tail light themselves. more
9/24/2009 10:16:59 AM
Filter Videos
Filter Videos
